14
ENGLISH
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table that follows.
1
2 Select a PSM item.
3 Adjust the PSM item selected.
4 Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5 Finish the procedure.
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
2
Indication, [Range]
BAS*
1
(bass), [–06 to +06]
Adjust the bass.
MID*
1
(mid-range), [–06 to +06]
Adjust the mid-range frequencies sound level.
TRE*
1
(treble), [–06 to +06]
Adjust the treble.
FAD*
2
(fader), [R06 to F06]
Adjust the front and rear speaker balance.
BAL (balance), [L06 to R06]
Adjust the left and right speaker balance.
S.BS*
1
(super bass), [S.BS ON or S.BS OFF],
[01 to 05, initial: 03]*
3
Maintain the richness and fullness of the bass sound
regardless of how low you set the volume.
VOL (volume), [00 to 30 or 50*
4
]
Adjust the volume.
*
1
When you adjust the bass, mid-range, treble, or super
bass, the adjustment you have made is stored for the
currently selected sound mode (iEQ) including “USER.”
*
2
If you are using a two-speaker system, set the fader
level to “00.”
*
3
Range adjustment for super bass is adjustable only
when it is set to “S.BS ON.“
*
4
Depending on the amplifier gain control setting. (See
page 16 for details.)
EN14-21KD-G531_003A_1.indd 14EN14-21KD-G531_003A_1.indd 14 10/30/06 11:13:41 PM10/30/06 11:13:41 PM
Downloaded from Caradio-Manual.com Manuals
To Next Page
Loading...
