ENGLISH
33REFERENCES
Symptom Remedy/Cause
MP3/WMA
• Tracks do not play back in the order you have
intended them to play.
Playback order is determined when files are recorded.
• Elapsed playing time is not correct. This sometimes occurs during play. This is caused by how
the tracks are recorded on the disc.
• “PLEASE” and “EJECT” appear alternately on
the display.
Insert a disc that contains MP3/WMA tracks.
• Correct characters are not displayed (e.g.
album name).
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
USB device
• Noise is generated. The track played back is not an MP3/WMA/WAV track.
Skip to another file. (Do not add the extension code
<.mp3>, <.wma>, or <.wav> to non-MP3/WMA/WAV
tracks.)
• “CHECK” keeps flashing on the display. • Readout time varies depending on the USB device.
• Do not use too many hierarchy, folders, and empty
folders*.
• Turn off the power then on again.
* Folder that is physically empty or folder that contains
data but does not contain valid MP3/WMA/WAV track.
• “NO FILE” flashes on the display.
• “NO USB” appears on the display.
Connect a USB device that contains tracks encoded in an
appropriate format.
• “READ” and “FAILED” appear alternately on
the display.
The total number of tracks could not be accessed properly.
• Correct characters are not displayed (e.g.
album name).
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
• While playing a track, sound is sometimes
interrupted.
MP3/WMA/WAV tracks have not been properly copied
into the USB device.
Copy MP3/WMA/WAV tracks again into the USB device,
and try again.
Continued on the next page
EN28-37_KD-G735_001A_f.indd 33EN28-37_KD-G735_001A_f.indd 33 12/12/06 9:20:23 AM12/12/06 9:20:23 AM
To Next Page
Loading...
Need help?
General
