Why can't I hear any sound from my JVC KD-LX330R Car Receiver speakers?
If you can't hear sound from the speakers on your JVC Car Receiver, first ensure that the volume isn't set to the minimum level; adjust it to a more audible setting. Also, verify that all cords and connections are correctly and securely connected.
What to do if my JVC KD-LX330R Car Receiver does not work at all?
If your JVC Car Receiver isn't working, it's possible the built-in microcomputer is malfunctioning due to noise or other factors. Try pressing the reset button on the front panel.
What to do if JVC Car Receiver displays “EJECT ERR”?
If “EJECT ERR” appears on the display of your JVC Car Receiver and the CD cannot be ejected, the CD player may be functioning incorrectly. Press and hold the number 4 button for more than 5 seconds.
What does “RESET 8” mean on my JVC KD-LX330R Car Receiver display?
If “RESET 8” appears on the display of your JVC Car Receiver, the unit is not connected to a CD changer correctly. Connect this unit and the CD changer correctly and press the reset button of the CD changer.
What to do if JVC KD-LX330R Car Receiver displays “RESET 1” – “RESET 7”?
If “RESET 1” through “RESET 7” appears on the display of your JVC Car Receiver, press the reset button of the CD changer.
What to do if CD cannot be ejected from JVC KD-LX330R Car Receiver?
While holding ¢, press the reset button. Release the reset button, then release ¢. (Be careful not to drop the CD when ejecting.)
How to fix static noise on JVC KD-LX330R Car Receiver radio?
If you're experiencing static noise while listening to the radio on your JVC Car Receiver, the antenna might not be connected firmly. Make sure to connect the antenna securely.
What to do if JVC Car Receiver CD sound is interrupted?
If the CD sound is sometimes interrupted in your JVC Car Receiver, there might be several reasons: * If you are driving on rough roads, stop CD play while driving on rough roads. * The CD might be scratched, try changing the CD. * The connections could be incorrect, so check the cords and connections.
What does “NO DISC” mean on my JVC KD-LX330R?
If “NO DISC” appears on the display of your JVC Car Receiver, it means no CD is in the magazine. Insert a CD to resolve this.
Why is SSM not working on my JVC KD-LX330R?
If the SSM automatic preset isn't working on your JVC Car Receiver, the radio signals may be too weak. Try storing the stations manually.
General| Max Power Output | 50 watts x 4 channels |
|---|---|
| Tuner | AM/FM |
| CD Player | Yes |
| USB Port | No |
| Bluetooth | No |
| Preamp Outputs | 2-channel |
| Display Type | LCD |
| Preamp Voltage | 2.5V |
| MP3 Playback | Yes |
| Detachable Face | Yes |
| Channels | 4 |
| Remote Control | Yes |
| Compatible Audio Formats | MP3, WMA |
| RMS Power Output | 22W x 4 |
| AUX Input | Yes |
To Next Page
