35
ENGLISH
4
Press and hold the number button (in
this example, 1) you want to store the
selected service into for more than 2
seconds.
5
Repeat the above procedure to store
other DAB services into other preset
numbers.
Notes:
• A previously preset DAB service is erased when a new
DAB service is stored in the same preset number.
• Preset DAB services are erased when the power supply
to the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset the
DAB services again.
Tuning into a preset DAB
service
You can easily tune into a preset DAB service.
Remember that you must store services first. If you
have not stored them yet, see pages 34 and 35.
1
Select the DAB tuner (DAB1–3).
1 Press SOURCE to select
DAB tuner as the source.
2 If necessary, press and
hold MODE BAND
repeatedly to select the
DAB band number
(DAB1, DAB2 or DAB3).
Each time you press and hold the button, the
DAB band changes as follows:
2
Select the number (1 – 6) for the
preset DAB service you want.
DAB1 DAB2 DAB3
1
7
SCM
Band number and
“MEMO” appear
alternately for a while.
BAND
EN32-39.KD-LX110R[E]f 2/6/01, 2:33 PM35
To Next Page
Loading...
Need help?
General
