To Next PageTo Next PageWhat to do if JVC KD-R449 shows 'MISWIRING CHK WIRING THEN RESET UNIT'?
If your JVC Receiver displays 'MISWIRING CHK WIRING THEN RESET UNIT' or 'WARNING CHK WIRING THEN RESET UNIT' and no operations can be performed, check to be sure the terminals of the speaker wires are insulated properly, then reset the unit.
What to do if no sound from JVC Receiver?
If you cannot hear any sound from your JVC Receiver, try the following: * Adjust the volume to the optimum level. * Check the cords and connections to ensure they are properly connected. * Ensure the rear ground terminal connected to the car’s chassis are using shorter and thicker cords.
How to improve radio reception on JVC KD-R449 Receiver?
To improve radio reception and reduce static noise on your JVC Receiver, make sure the antenna is connected firmly and pulled out all the way.
How to eject a disc from JVC KD-R449 Receiver?
To forcibly eject a disc from your JVC Receiver, press and hold the 0 button. Be careful not to drop the disc when it is ejected.
Why does my JVC Receiver say 'CANNOT PLAY'?
If your JVC Receiver flashes “CANNOT PLAY” or the connected device cannot be detected, verify that the connected device is compatible with the unit and that the files are in supported formats. Also, try reattaching the device.
What does it mean when 'READING' keeps flashing on JVC Receiver?
If “READING” keeps flashing on your JVC Receiver, avoid using too many hierarchical levels and folders. You can also try reloading the disc or reattaching the USB device.
What to do if JVC KD-R449 shows 'PLEASE' and 'EJECT' alternately?
If your JVC Receiver alternately displays “PLEASE” and “EJECT”, press the 0 button, then insert the disc correctly.
Why is the playback order wrong on my JVC Receiver?
The playback order on your JVC Receiver is determined by the file name (if using USB) or the order in which files were recorded (if using a disc).
What to do if JVC KD-R449 Receiver displays 'IN DISC'?
If your JVC Receiver displays “IN DISC”, make sure nothing is blocking the loading slot when you eject the disc.
Why is the elapsed playing time incorrect on my JVC Receiver?
The accuracy of the elapsed playing time on your JVC Receiver depends on the recording process used earlier.
How to begin playback from CD, USB, or iPod sources.
Procedures for searching, tuning, and storing radio stations.
Selecting built-in EQs or creating custom sound profiles.
Steps for securely mounting the unit into the vehicle dashboard.
Instructions on using the mounting sleeve and trim plate.
Diagrams for connecting wiring harnesses based on vehicle models.
Information on connecting to ISO terminals and steering wheel remotes.
List of included installation parts and recommended custom harnesses.
General
