What does 'PLS LOGIN' mean on JVC Car Receiver and what should I do?
- NNicolas JonesSep 17, 2025
If your JVC Car Receiver displays “PLS LOGIN”, you haven’t logged in. Log in again.
What does 'PLS LOGIN' mean on JVC Car Receiver and what should I do?
If your JVC Car Receiver displays “PLS LOGIN”, you haven’t logged in. Log in again.
What to do if my JVC Car Receiver disc cannot be ejected?
If your JVC Car Receiver disc cannot be ejected, press and hold to forcibly eject the disc. Exercise caution to avoid dropping the disc when it ejects.
What does 'UPDATE APP' mean on JVC Car Receiver and what should I do?
If your JVC Car Receiver displays “UPDATE APP”, ensure that you have installed the latest version of the iHeart Link for JVC application on your device.
What does 'UPGRADE APP' mean on JVC Car Receiver and what should I do?
If your JVC Car Receiver displays “UPGRADE APP”, make sure you have installed the latest version of the Pandora application on your device.
What does 'STATION NOT AVAILABLE' mean on JVC Car Receiver and what should I do?
If your JVC Car Receiver displays “STATION NOT AVAILABLE”, the broadcast from the station is over.
What does “CHK DEVICE” mean on JVC Car Receiver and what should I do?
If your JVC Car Receiver displays “CHK DEVICE”, check the Pandora application on your device.
What to do if JVC Car Receiver cannot playback at [AUTO MODE]?
If your JVC Car Receiver cannot playback in [AUTO MODE], ensure that the JVC MUSIC PLAY APP is installed on your Android device. Reconnect the Android device and select the appropriate control mode. If the problem persists, the connected Android device may not support [AUTO MODE].
What does 'CANNOT PLAY' mean on JVC Car Receiver with Android device and what should I do?
If your JVC Car Receiver displays “CANNOT PLAY” with an Android device, ensure that the Android device contains playable audio files. You can also try reconnecting the Android device or restarting it.
Why playback order is not as intended on JVC Car Receiver?
The playback order on your JVC Car Receiver is determined by the file name (if using USB) or the order in which the files were recorded (if using a disc).
What does 'NO DEVICE' or 'READING' keeps flashing on JVC Car Receiver and what should I do?
If your JVC Car Receiver displays “NO DEVICE” or “READING” keeps flashing, try switching off the developer options on your Android device. If the issue continues, reconnect the Android device. Note that the connected Android device may not support [AUTO MODE].
Maximum Output Power | 50W x 4 |
---|---|
RMS Power | 22W x 4 |
Pre-Output Level | 2.5V |
Pre-Output Impedance | 10k ohms |
Frequency Response | 20 Hz - 20 kHz |
USB Standard | USB 2.0 |
USB Current Supply | 1A |
AM Frequency Range | 530 - 1710 kHz |
Channels | 4 |
Built-in Bluetooth | No |
USB Port | Yes |
AUX Input | Yes |
Radio Tuner | Yes |
Display | LCD |
Remote Control | Yes |
CD Player | Yes |
MP3 Playback | Yes |
WMA Playback | Yes |
AAC Playback | Yes |
iPod Compatibility | Yes |
iPhone Compatibility | Yes |
Android Compatibility | Yes |
Steering Wheel Control | Yes |
High-Pass Filter | Yes |
Low-Pass Filter | Yes |
Subwoofer Output | Yes |
MP3 Bit Rate | 32 kbps - 320 kbps |
WMA Bit Rate | 32 kbps - 192 kbps |
File System | FAT16/FAT32 |
Presets | 18 FM, 6 AM |
Key instructions for proper use and safety warnings.
Identifies key components of the unit and remote.
Steps for cancelling demo, setting clock, and basic settings.
How to begin playback and choose audio sources.
Operations for track navigation, repeat, and random play.
Steps to set up and begin using the Pandora service.
Setup and initial use of the iHeartRadio service.
Connecting the tuner and activating the subscription.
Saving and recalling favorite SiriusXM channels.
How to connect and play audio from auxiliary devices.
Solutions for common problems with general, radio, and media playback.
Troubleshooting for Android, Pandora, and iHeartRadio services.
Step-by-step guide for installing the unit in a vehicle.
Key advice for connecting the unit's wiring harness.