JVC KD-R821BT

23ENGLISH
Menu item
Selectable setting, [ Initial: Underlined ]
Color
Button Zone 29 preset colors / User / COLORFLOW 1/ 2/ 3 : Selects your preferred color for
buttons illumination (except for DISP / EQ / 0 ) and display color separately.
• If <All Zone> is selected, the button and display illumination will change to the
current/selected <Button Zone> color.
• Initial color : Button Zone [ 06 ], Display Zone [ 01 ], All Zone [ 06 ]
Display Zone
All Zone
Color Setup
Day Color Button Zone You can create your own day and night colors for <Button Zone>
and <Display Zone> separately.
Press 5 / ∞ to select a primary color [ Red / Green / Blue ],
then turn the control dial to adjust the level [ 00 — 31 ]. Repeat
this procedure until you have adjusted all the three primary colors.
Then, press the control dial to confirm.
• If “ 00 ” is selected for all the primary colors for <Display Zone>,
nothing appear on the display.
Display Zone
Night Color Button Zone
Display Zone
Menu Color
On : Changes the display and buttons (except for DISP / EQ / 0 ) illumination during
menu, list search and playback mode operations. / Off : Cancels.
Dimmer
Dimmer Set Auto : Changes the display and button illumination between the Day/Night
adjustments in <Brightness>/<Color Setup> setting when you turn off/on the car
headlights *
2
. / Time Set : Sets the start/end timer for dimmer. Turn the control dial
to adjust the start time, then press the control dial to confirm. Repeat this step to enter
the end time. / On : Selects the Night adjustments in <Brightness>/<Color Setup>
setting for the display and button illumination. / Off : Selects the Day adjustments in
<Brightness>/<Color Setup> setting for the display and button illumination.
Brightness Day [ 23 ] / Night [ 11 ] : Customizes the display and button illumination brightness
level [ 00 — 31 ] for day and night.
Display
Scroll *
3
Once : Scrolls the displayed information once. / Auto : Repeats scrolling (at 5-second
intervals). / Off : Cancels.
(Pressing DISP for more than one second can scroll the display regardless of the
setting.)
Tag Display On : Shows the Tag information while playing MP3/WMA/WAV tracks. / Off : Cancels.
*
2
The illumination control lead connection is required. (See “Installation/Connection Manual.”) This setting
may not work correctly on some vehicles (particularly on those having a control dial for dimming). In this case,
change the setting to any other than <Dimmer Auto>.
*
3
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
All zone
Display zone
Button zone
Continued...
EN02-29_KD-R821BT_003A_2.indd 23EN02-29_KD-R821BT_003A_2.indd 23 1/13/11 5:17:19 PM1/13/11 5:17:19 PM