JVC KD-R891BT

ENGLISH
15
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH®
• A maximum of two Bluetooth phones and one
Bluetooth audio device can be connected at any
time.
However, while in BT AUDIO source, you can
connect to five Bluetooth audio devices and
switch between these five devices. (
20 )
• Some Bluetooth devices may not automatically
connect to the unit after pairing. Connect the
device to the unit manually.
• Refer to the instruction manual of the Bluetooth
device for more information.
Auto Pairing
When you connect the following devices to the USB
input terminal, pairing request (via Bluetooth) is
automatically activated.
KD-R991BT / KD-R891BT : iPhone/iPod touch/Android
device
KD-R792BT : Android device
Press the following to pair once you have
confirmed the device name.
KD-R991BT / KD-R891BT :
KD-R792BT : volume knob
Automatic pairing request is activated only if:
– Bluetooth function of the connected devcie is
turned on.
–
[AUTO PAIRING] is set to [ON] . ( 19)
– JVC MUSIC PLAY application is installed on
the Android device
( 8) and [AUTO MODE] is
selected
( 9) .
BLUETOOTH — Mobile phone
For key layout on the faceplate, see page3 or page4.
Receive a call
When there is an incoming call:
•
KD-R991BT/KD-R891BT :
The symbolic button will blink in the color you have selected in
[RING COLOR] . ( 17)
KD-R792BT :
The buttons will blink in the blinking pattern you have selected in
[RING ILLUMI] . ( 17)
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 17)
During a call:
•
KD-R991BT/KD-R891BT :
The symbolic button stop blinking and illuminate in the color you have selected in
[RING
COLOR]
. ( 17)
KD-R792BT : The buttons stop blinking.
• If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.
The following operations may differ or not available depending on the connected phone.
To On the faceplate On the remote control
First incoming call...
Answer a call
Press
or the following button.
KD-R991BT / KD-R891BT :
KD-R792BT : volume knob
Press
.
Reject a call
Press and hold
or the
following button.
KD-R991BT / KD-R891BT :
KD-R792BT : volume knob
Press and hold
.
End a call
Press and hold
or the
following button.
KD-R991BT / KD-R891BT :
KD-R792BT : volume knob
Press and hold
.
JS_JVC_KD_R991BT_M_EN_2.indd 15JS_JVC_KD_R991BT_M_EN_2.indd 15 7/24/2017 10:07:26 AM7/24/2017 10:07:26 AM