JVC KD-R891BT

ENGLISH
17
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Make the settings for receiving a call
1
Press to enter Bluetooth mode.
2 Perform ‘select an item ( 3 or 4) ’ operation to select
an item
( see the following table ) .
3 Repeat step 2 until the desired item is selected or activated.
To return to the previous setting item, press .
Default:
XX
SETTINGS
AUTO ANSWER
01 SEC to 30 SEC :The unit answers incoming call
automatically in the selected time (in seconds).;
OFF :Cancels.
RING COLOR KD-R991BT / KD-R891BT :
COLOR 01 to COLOR 49 ( COLOR 08 ): Selects the illumination
color for the symbolic button as notification when there is an
incoming call and during a call.;
OFF :Cancels.
RING ILLUMI KD-R792BT :
BLINK 01 to BLINK 05 ( BLINK 02 ): Selects the blinking
pattern for the buttons as notification when there is an
incoming call.;
OFF :Cancels.
BATT/SIGNAL
*
KD-R991BT / KD-R891BT :
AUTO :Shows the strength of the battery and signal when the
unit detects a Bluetooth device and the Bluetooth device is
connected.;
OFF :Cancels.
*
Functionality depends on the type of the phone used.
BLUETOOTH®
Make a call
You can make a call from the call history, phonebook, or dialing the number. Call
by voice is also possible if your mobile phone has the feature.
1 Press to enter Bluetooth mode.
“(First device name)” appears.
• If two Bluetooth phones are connected, press again to switch to
another phone.
“(Second device name)” appears.
2 Perform ‘select an item ( 3 or 4) ’ operation to select an item ( see the
following table
) .
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
To return to the previous setting item, press
.
RECENT CALL (Applicable only if the phone supports PBAP.)
1 Press the following button to select a name or a phone number.
KD-R991BT / KD-R891BT :
KD-R792BT : volume knob
• “<” indicates call received, “>“ indicates call made, “M” indicates call missed.
• “NO HISTORY” appears if there is no recorded call history or call number.
2 Press the following to call.
KD-R991BT / KD-R891BT :
KD-R792BT : volume knob
PHONEBOOK (Applicable only if the phone supports PBAP.)
1 Press to select the desired letter (A to Z, 0to9, and OTHERS).
• “OTHERS” appears if the first character is other than Ato Z, 0 to 9.
2 Perform ‘select an item ( 3 or 4) ’ operation to select a name.
3 Perform ‘select an item ( 3 or 4) ’ operation to select a phone number
and to call.
• The phonebook of the connected phone is automatically transferred to the unit
when pairing.
• This unit can display only non-accent letters. (Accent letters such as “Ú” is showns
as “U”.)
JS_JVC_KD_R991BT_M_EN_2.indd 17JS_JVC_KD_R991BT_M_EN_2.indd 17 7/24/2017 10:07:30 AM7/24/2017 10:07:30 AM