JVC KD-R891BT

18
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH®
DIAL NUMBER 1 Perform the following operation to select a number (0 to 9) or character
(
, #, +).
KD-R991BT / KD-R891BT : Press
KD-R792BT : Turn the volume knob
2 Press to move the entry position.
Repeat steps
1 and 2 until you finish entering the phone number.
3 Press the following to call.
KD-R991BT / KD-R891BT :
KD-R792BT : volume knob
VOICE Speak the name of the contact you want to call or the voice command to
control the phone functions.
( Make a call using voice recognition)
Make a call using voice recognition
1
Press and hold to activate the connected phone.
2 Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of
iPhone.
Settings in memory
Store a contact in memory
You can store up to 6 contacts into the number buttons (1 to 6).
1 Press to enter Bluetooth mode.
2 Perform ‘select an item ( 3 or 4) ’ operation to select
[RECENT CALL] , [PHONEBOOK] or [DIAL NUMBER] .
3 Perform ‘select an item ( 3 or 4) ’ operation to select a
contact or enter a phone number.
If a contact is selected, press the following to show the phone
number.
KD-R991BT / KD-R891BT :
KD-R792BT : volume knob
4 Press and hold one of the number buttons (1 to 6).
“MEMORY P(selected preset number)” appears when the contact is
stored.
To erase a contact from the preset memory, select
[DIAL NUMBER] in step 2
and store a blank number.
Make a call from memory
1
Press to enter Bluetooth mode.
2 Press one of the number buttons (1 to 6).
3 Press the following to call.
KD-R991BT / KD-R891BT :
KD-R792BT : volume knob
“NO PRESET” appears if there is no contact stored.
JS_JVC_KD_R991BT_M_EN_2.indd 18JS_JVC_KD_R991BT_M_EN_2.indd 18 7/24/2017 10:07:31 AM7/24/2017 10:07:31 AM