ENGLISH
19
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH®
Bluetooth mode settings
1
Press and hold .
2 Perform ‘select an item
( 3
or
4)
’ operation to select an item
(
see the following table
)
.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press .
Default:
XX
BT MODE
PHONE SELECT
* Selects the phone or audio device to connect or disconnect.
“
” appears in front of the device name when connected.
“
” appears in front of the current playback audio device.
AUDIO SELECT
*
DEVICE DELETE
1
Perform ‘select an item
( 3
or
4)
’ operation to select a
device to delete.
2
Perform ‘select an item
( 3
or
4)
’ operation to select
[YES]
or
[NO]
.
PIN CODE EDIT
(0000)
Changes the PIN code (up to 6 digits).
1
Perform the following operation to select a number.
KD-R991BT
/
KD-R891BT
: Press
KD-R792BT
: Turn the volume knob
2
Press to move the entry position.
Repeat steps
1
and
2
until you finish entering the PIN code.
3
Press the following to confirm.
KD-R991BT
/
KD-R891BT
:
KD-R792BT
: volume knob
*
You can only connect a maximum of two Bluetooth phones and one Bluetooth audio device
at any time.
RECONNECT ON
:The unit automatically reconnect when the last connected
Bluetooth device is within range.;
OFF
:Cancels.
AUTO PAIRING ON
:The unit automatically pair supported Bluetooth device (iPhone/
iPod touch/Android device) when it is connected through USB input
terminal.Depending on the operating system of the connected device,
this function may not work. ;
OFF
:Cancels.
INITIALIZE YES
:Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.).;
NO
:Cancels.
INFORMATION MY
BT
NAME
: Displays the unit name (“KD-R9 BT”/
“KD-R8
BT”/“KD-R7 BT”).;
MY
ADDRESS
: Shows address of this unit.
Bluetooth compatibility check mode
You can check the connectivity of the supported profile between the
Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1 Press and hold .
“BLUETOOTH”
“CHECK MODE” appears. “SEARCH NOW USING
PHONE”
“PIN IS 0000” scrolls on the display.
2 Search and select “KD-R9 BT”/“KD-R8 BT”/“KD-R7 BT” on the
Bluetooth device within 3minutes.
3 Perform (A), (B) or (C) depending on what appears on the display.
(A) “PAIRING”
“XXXXXX” (6-digit passkey): Ensure that the same
passkey appears on the unit and Bluetooth device, then operate
the Bluetooth device to confirm the passkey.
(B) “PAIRING”
“PIN IS 0000”: Enter “0000” on the Bluetooth device.
(C) “PAIRING”: Operate the Bluetooth device to confirm pairing.
JS_JVC_KD_R991BT_M_EN_2.indd 19JS_JVC_KD_R991BT_M_EN_2.indd 19 7/24/2017 10:07:33 AM7/24/2017 10:07:33 AM
To Next Page
Loading...
