JVC KD-R985BTS

ENGLISH
23
LOUDNESS LEVEL 01 / LEVEL 02 :Boosts low or high frequencies to produce a well-
balanced sound at low volume.;
OFF :Cancels.
SUB.W LEVEL
*
1
SPK-OUT
*
2
(Not applicable when 3-way crossover is selected.)
SUB.W 00 to SUB.W +06 ( SUB.W +03 ):Adjusts the
output level of the subwoofer connected via speaker lead.
( 35, 36)
PRE-OUT
*
3
SUB.W –50 to SUB.W +10 ( SUB.W 00 ):Adjusts the
output level of the subwoofer connected to the lineout
terminals (SW or REAR/SW) through an external amplifier.
( 35, 36)
SUBWOOFER
SET
*
3
ON : Turns on the subwoofer output.; OFF :Cancels.
FADER (Not applicable when 3-way crossover is selected.)
POSITION R15 to POSITION F15 ( POSITION 00 ):Adjusts the front and rear
speaker output balance.
BALANCE
*
4
POSITION L15 to POSITION R15 ( POSITION 00 ):Adjusts the left and right
speaker output balance.
VOLUME  ADJUST LEVEL –15 to LEVEL +06 ( LEVEL 00 ):Preset the initial volume level of
each source (compared to the FM volume level). Before adjustment, select
the source you want to adjust.
AMP  GAIN LOW  POWER :Limits the maximum volume level to 25. (Select if the
maximum power of each speaker is less than 50W to prevent damaging the
speakers.);
HIGH POWER :The maximum volume level is 35.
SPK/PRE  OUT (Not applicable when 3-way crossover is selected.)
Depending on the speaker connection method, select the appropriate
setting to get the desired output.
( 24, Speaker output settings)
SPEAKER SIZE
Depending on the crossover type you have selected ( [X ' OVER TYPE] ),
2-way crossover or 3-way crossover setting items will be shown.
( 25,
Crossover settings)
By default, 2-way crossover type is selected.
X ' OVER
AUDIO SETTINGS
DTA SETTINGS
For settings, 26, Digital Time Alignment settings .
CAR SETTINGS
X ' OVER TYPE Caution
: Adjust the volume before changing the [X ' OVER TYPE]
to avoid the sudden increase or decrease of the output level.
2-WAY (Displayed only when [3-WAY] is selected.)
YES :Selects two way crossover type.; NO :Cancels.
3-WAY (Displayed only when [2-WAY] is selected.)
YES :Selects three way crossover type.; NO :Cancels.
SOUND EFFECT
SPACE ENHANCE
(Not applicable for TUNER source.)
SMALL/MEDIUM/LARGE : Virtually enhances the sound space.;
OFF :Cancels.
SND RESPONSE LEVEL1 / LEVEL2 / LEVEL3 : Virtually makes the sound more
realistic.;
OFF :Cancels.
SOUND LIFT LOW / MIDDLE / HIGH : Virtually adjust the sound position heard
from the speakers.;
OFF :Cancels.
VOL LINK EQ ON :Boosts the frequency to reduce the noise heard from outside
the car or running noise of the tyres.;
OFF :Cancels.
K2 TECHNOLOGY (Not applicable for TUNER source, SIRIUS XM source and AUX
source.)
ON :Improve the sound quality of compressed music.;
OFF :Cancels.
*
1
Displayed only when [SUBWOOFER SET] is set to [ON] .
*
2
For 2-way crossover: Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W] .
( 24)
*
3
For 2-way crossover: Displayed only when [SPK/PRE OUT] is set to [REAR/SUB.W] or
[SUB.W/SUB.W] . ( 24)
*
4
This adjustment will not affect the subwoofer output.
JS_JVC_KD_R985BTS_K_EN_5.indd 23 16/8/2016 10:34:33 AM