How to fix sound not working on JVC KD-R951BT?
If you cannot hear any sound from your JVC Car Receiver, first, adjust the volume to the optimum level. If the issue persists, check the cords and connections to ensure they are properly connected.
What to do if no Bluetooth device is detected on JVC Car Receiver?
If your JVC Car Receiver is not detecting any Bluetooth devices, try searching from the Bluetooth device again. If that doesn't work, reset the unit.
Why pairing cannot be made on JVC Car Receiver?
If pairing cannot be made with your JVC Car Receiver, ensure you have entered the same PIN code on both the unit and the Bluetooth device. If the problem persists, delete the pairing information from both devices and perform the pairing process again.
How to fix “BT DEVICE NOT FOUND” on JVC Car Receiver?
If “BT DEVICE NOT FOUND” appears on your JVC Car Receiver, turn on Bluetooth from your device and connect manually.
How to fix “BT ERROR PLS UPDATE” on JVC KD-R951BT?
If “BT ERROR PLS UPDATE” appears on your JVC Car Receiver, update the Bluetooth firmware.
Why is the radio reception poor on my JVC KD-R951BT Car Receiver?
If you are experiencing poor radio reception or static noise with your JVC Car Receiver, ensure the antenna is firmly connected. Also, try pulling the antenna out all the way to improve reception.
How to fix iPod/iPhone not working with JVC Car Receiver?
If your iPod/iPhone is not turning on or working with the JVC Car Receiver, check the connection between the unit and your iPod/iPhone. If the issue continues, detach and reset the iPod/iPhone using a hard reset.
What to do if JVC KD-R951BT Car Receiver says “CANNOT PLAY”?
If “CANNOT PLAY” flashes or the connected device cannot be detected on your JVC Car Receiver, verify that the connected device is compatible with the unit and that the files are in supported formats. If compatible, try reattaching the device.
Why does “READING” keep flashing on my JVC KD-R951BT Car Receiver?
If “READING” keeps flashing on your JVC Car Receiver, avoid using too many hierarchical levels and folders. If the issue persists, reload the disc or reattach the USB device.
What does “MISWIRING CHK WIRING THEN RESET UNIT” mean on JVC KD-R951BT Car Receiver?
If “MISWIRING CHK WIRING THEN RESET UNIT” or “WARNING CHK WIRING THEN RESET UNIT” appears on your JVC Car Receiver, check to be sure the terminals of the speaker wires are insulated properly, then reset the unit.
General| Brand | JVC |
|---|---|
| Model | KD-R951BT |
| Category | Car Receiver |
| Language | English |
To Next Page
