Why can't I hear any sound from my JVC KD-S640 speakers?
If you cannot hear sound from the speakers of your JVC Car Receiver, first, check if the volume control is set to the minimum level and adjust it accordingly. Also, examine the cords and connections to ensure they are correctly connected.
What to do if 'NO DISC' appears on my JVC Car Receiver display?
If 'NO DISC' appears on the display of your JVC Car Receiver, it means that either no CD is in the loading slot, so you should insert one, or the CD is inserted incorrectly, so you should insert it correctly.
How to eject a CD that is stuck in my JVC Car Receiver?
If the CD in your JVC Car Receiver cannot be played back nor ejected, the CD player may be functioning incorrectly. To resolve this, press and 0 at the same time for more than 2 seconds. Be careful not to drop CD when it is ejected.
How to fix static noise when listening to the radio on my JVC KD-S640 Car Receiver?
If you are experiencing static noise while listening to the radio on your JVC Car Receiver, the antenna may not be firmly connected. Ensure that the antenna connection is secure.
Why is the CD sound interrupted sometimes on my JVC KD-S640?
If the CD sound is sometimes interrupted on your JVC Car Receiver, it could be due to several reasons. If you are driving on rough roads, stop CD play while doing so. The CD might be scratched, in which case you should change the CD. Also, incorrect connections can cause this issue, so check the cords and connections.
General| Type | CD Receiver |
|---|---|
| Tuner | AM/FM |
| CD Playback | Yes |
| Audio Formats | MP3, WMA |
| USB Port | Yes |
| Aux Input | Yes |
| Bluetooth | No |
| Subwoofer Output | Yes |
| Display Type | LCD |
| Detachable Face | Yes |
| Preset EQ | Yes |
| Remote Control | Yes |
| Power Output | 50 Watts x 4 |
| RMS Power | 22W x 4 |
| Preset Stations | 18 FM, 6 AM |
To Next Page
