To Next PageTo Next PageWhat to do if sound cannot be heard from JVC Car Receiver speakers?
If you cannot hear any sound from the speakers, it might be because the volume is turned to the minimum level. Adjust it to the optimum level. Also, check the cords and connections, because incorrect connections may also cause this problem.
What to do if JVC Car Receiver displays “NO DISC”?
If “NO DISC” appears on the display, it could be because there is no CD in the loading slot. Insert a CD into the loading slot. Also, make sure the CD is inserted correctly.
What to do if JVC Car Receiver CD can be neither played back nor ejected?
If the CD can be neither played back nor ejected, the CD player may be malfunctioning. Press and 0 at the same time for more than 2 seconds. Be careful not to drop CD when it is ejected.
Why is there static noise while listening to the radio on my JVC Car Receiver?
Static noise while listening to the radio may occur if the antenna is not connected firmly. Connect the antenna firmly to resolve this issue.
General| CD Playback | Yes |
|---|---|
| MP3 Playback | Yes |
| WMA Playback | Yes |
| Bluetooth | No |
| Display | LCD |
| Detachable Face | Yes |
| Preset EQ | Yes |
| Rotary Encoder Volume | Yes |
| Wireless Remote Control | Yes |
| HD Radio | No |
| Satellite Radio Ready | No |
| RMS Power Output | 22 Watts x 4 Channels |
| Tuner | FM/AM |
| USB Input | Yes |
| AUX Input | Yes |
| Power Output (Peak) | 50 Watts x 4 Channels |
