JVC KD-SH909R User Manual

48
ENGLISH
To play back tracks repeatedly (Repeat Play)
You can play back the current track or all tracks
on the current disc or specified disc in the CD
changer.
1 Press M (mode) while playing
a disc. This unit enters the
functions mode.
2 Press RPT (repeat) while still
in the functions mode, so
that “REPEAT1” or
“REPEAT2” flashes on the
display.
Then, each time you press
RPT, the repeat play mode
changes as follows:
REPEAT1 Lights The current track (or
specified track).
REPEAT2 Flashes All tracks of the current
disc (or specified disc).
Plays repeatedly
Mode
To play back only intros (Intro scan)
You can play back the first 15 seconds of each
track sequentially.
1 Press M (mode) while playing
a disc. This unit enters the
functions mode.
2 Press INT (intro scan) while
still in the functions mode, so
that “INTRO1” or “INTRO2”
flashes on the display.
Then, each time you press
INT, the intro scan mode
changes as follows:
4
INTRO1 Of all tracks on all
inserted discs.
INTRO2 Of the first track on
each inserted disc.
Mode
Plays the beginnings
(15 seconds)
RPT
Indicator
Track number
flashes
Disc number
flashes
Ex.: When “INTRO1” is selected.
Ex.: When “REPEAT1” is selected.
RPT indicator lights up.
REPEAT1
Canceled
REPEAT2
RPT
Indicator
INTRO 1
Canceled
INTRO 2
EN46_48SH909_707R[E]f.pm5 1/23/02, 11:38 AM48

JVC KD-SH909R Specifications

General

Brand	JVC
Model	KD-SH909R
Category	Car Receiver
Language	English