17
ENGLISH
CONTINUED ON THE NEXT PAGE
SEL
ATT
M
MODE
SEL
345621
3
Select one of the twenty-nine PTY
codes. (See page 21.)
Selected code name
appears on the display
and is stored into
memory.
4
Finish the setting.
To set PTY Standby Reception
When the DAB tuner is connected, the following
operations will set PTY Standby Reception both
for the FM tuner and the DAB tuner. (See page
69.)
1 Press MODE (M) while listening to
an FM stereo broadcast.
“Mode” appears on the display, and
the number buttons start flashing.
7 When the current source is other than FM,
the TP indicator lights up.
If a station starts broadcasting a traffic
announcement, “Traffic Flash” appears on the
display, and this unit automatically changes the
source and tunes in to the station.
Using PTY Standby Reception
PTY Standby Reception allows the unit to switch
temporarily to your favorite programme (PTY:
Programme Type) from any source except AM
stations.
To select your favorite PTY code for PTY
Standby Reception
When shipped from factory, PTY Standby
Reception has been set to work for searching for
“News” programmes.
You can select your favorite programme type for
PTY Standby Reception.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see pages 47 and 48.)
2
Press number button 4 to select
“TUNER”—Tuner category of the
PSM settings.
The “PTY Stnby” (standby) setting screen
appears on the display.
EN15-21SH9101[E_EX]f.p65 03.2.27, 22:5517
To Next Page
Loading...
Need help?
General
