JVC KD-SH99 - Page 18

18
ENGLISH
To skip to the next directory—either on
the same hierarchy level or on a different
hierarchy level
On the control panel:
1 Press MODE (M) while
playing an MP3 disc. The unit
enters the functions mode.
2 Press ¢ briefly while
still in the functions mode.
Each time you repeat steps
1 and 2, the next directory is
located (and the first file in
the directory starts playing, if
recorded).
(See “MP3 playback/search
order” on page 15.)
On the remote controller:
Each time you press and hold
the button consecutively, the
next directory is located (and the
first file in the directory starts
playing, if recorded).
(See “MP3 playback/search
order” on page 15.)
To skip to the previous directory—either
on the same hierarchy level or on a
different hierarchy level
On the control panel:
1 Press MODE (M) while
playing an MP3 disc. The unit
enters the functions mode.
2 Press 4 briefly while still
in the functions mode.
Each time you repeat steps
1 and 2, the previous
directory is located (and the
first file in the directory starts
playing, if recorded).
(See “MP3 playback/search
order” on page 15.)
On the remote controller:
Each time you press and hold
the button consecutively, the
previous directory is located
(and the first file in the directory
starts playing, if recorded).
(See “MP3 playback/search
order” on page 15.)
To go to a particular directory directly
IMPORTANT:
To directly select the directories using the
number button(s), it is required that directories
are assigned 2 digit numbers at the beginning of
their directory names. (This can only be done
during the recording of CD-Rs or CD-RWs.)
Ex.: If directory name is “01 ABC”
press 1 to go to directory 01 ABC
If directory name is “1 ABC”
pressing 1 does not work
If directory name is “12 ABC”
press and hold 6 (12) to go to
directory 12 ABC
Press the number button corresponding to the
directory number to start playing the first file in
the selected directory.
• To select a directory number from 01 – 06:
Press 1 (7) – 6 (12) briefly.
• To select a directory number from 07 – 12:
Press and hold 1 (7) – 6 (12) for more than 1
second.
Notes:
• If “MP3” flashes on the display after you have
selected a directory, it means that the directory does
not contain any MP3 files.
• You cannot directly select a directory with a number
greater than 12.
To select a particular file in a directory, press
¢ or 4 after selecting the directory.
PRESET
PRESET
EN14-20.KD-SH99[J]f 4/3/01, 2:57 PM18