EasyManuals Logo

JVC KD-X252 User Manual

JVC KD-X252
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
ENGLISH
15
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
REFERENCES
Change the display information
Each time you press , the display information changes.
If the information is unavailable or not recorded, “NO TEXT”, “NO NAME”, or other
information (eg. station name) appears or display will be blank.
Source name Display information
FM
or
AM
Frequency Clock (back to the beginning)
(For FM Radio Data System stations only)
Station name (PS)/Program type (PTY)
Radio text
Radio text+
Radio text+ title/Radio text+ artist
Frequency
Clock
(back to the
beginning)
USB (For MP3/WMA/WAV/FLAC files)
Song title/Artist Album name/Artist Folder name File name
Playing time
Clock (back to the beginning)
iPod
or
ANDROID
When
[HEAD MODE]
/
[AUTO MODE]
is selected
(
8)
:
Song title/Artist
Album name/Artist Playing time Clock (back
to the beginning)
PANDORA
Station name Shared/Radio Song title Artist name Album name
Playing time Clock (back to the beginning)
AUX
AUX Clock (back to the beginning)
TROUBLESHOOTING
Symptom Remedy
General
Sound cannot be heard.
Adjust the volume to the optimum level.
Check the cords and connections.
“MISWIRING CHECK
WIRING THEN PWR ON”
appears.
Turn the power off, then check to be sure the terminals
of the speaker wires are insulated properly. Turn the
power on again.
“PROTECTING SEND
SERVICE” appears.
Send the unit to the nearest service center.
Source cannot be selected.
Check the
[SOURCE SELECT]
setting.
( 4)
Radio
Radio reception is poor.
Static noise while
listening to the radio.
Connect the antenna firmly.
USB/iPod
Playback order is not as
intended.
The playback order is determined by the file name .
Elapsed playing time is not
correct.
This depends on the recording process earlier.
“NOT SUPPORT” appears
and file skips.
Check whether the file is a playable format.
( 14)
“READING” keeps flashing.
Do not use too many hierarchical levels and folders.
Reattach the USB device.
“CANNOT PLAY” flashes
and/or connected device
cannot be detected.
Check whether the connected device is compatible with
this unit and ensure the files are in supported formats.
( 14)
Reattach the device.
The iPod/iPhone does not
turn on or does not work
Check the connection between this unit and iPod/
iPhone.
Disconnect and reset the iPod/iPhone using hard reset.
Correct characters are not
displayed.
This unit can only display uppercase letters, numbers,
and a limited number of symbols.
Depending on the display language you have selected
( 5)
, some characters may not be displayed
correctly.
JS_JVC_KD-X252_M_EN_1.indd 15JS_JVC_KD-X252_M_EN_1.indd 15 22/6/2017 9:54:44 AM22/6/2017 9:54:44 AM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-X252 and is the answer not in the manual?

JVC KD-X252 Specifications

General IconGeneral
DIN size1 DIN
EqualizerYes
Product colorBlack
Ready for iPodNo
Equalizer bands quantity15
Maximum power per channel50 W
AM band range531 - 1611 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
Preset stations quantity24
Audio systemMOSFET
Audio formats supportedFLAC, MP3, WAV, WMA
Display typeLCD
Key illumination colorRed
Weight and Dimensions IconWeight and Dimensions
Weight600 g
Dimensions (WxDxH)182 x 100 x 53 mm

Related product manuals