JVC KD-X260BT - Iheartradio

10
ENGLISH
iHeartRadio®
You can listen to iHeartRadio on the following devices via USB input terminal
(see the following) or via Bluetooth (page 23).
KD-X360BTS: iPhone/iPod (via Bluetooth or via USB input
terminal) or Android smartphone (via Bluetooth)
KD-X260BT/KD-SX25BT: Android smartphone (via Bluetooth)
Preparation:
Install the latest version of iHeartAuto application on your device (iPhone/
iPod touch), then create an account and log in to iHeartRadio.
• Select
[ON] for [IHEART SRC] in [SOURCE SELECT] . (Page 4)
Start listening
1
Start up the iHeartAuto application on your device.
2 Connect your device to the USB input terminal.
KD-X360BTS:
3 Press B SRC repeatedly to select IHEARTRADIO.
Broadcast starts automatically
* Do not leave the cable inside the car when not used.
To On the faceplate On the remote control
Play back/pause Press the volume knob.
Press d.
Skip a track for custom
station
Press T. Press I.
Select thumbs up or
thumbs down
Press 2 J / 1 K. Press J / K.
Create a new/custom
station
Press and hold the volume
knob.
( Not available )
Scan for live station
1 Press 3 to start
scanning.
2 Press 3 again to listen
to the station.
( Not available )
Search and store a station
1
Press .
2 Turn the volume knob to select a category, then press the knob.
3 Turn the volume knob to select the desired station, then press the
knob.
When a city list appears, you can search cities in alphabetical order by
turning the volume knob quickly.
To cancel, press and hold
.
To store a station: Press and hold one of the number buttons (4, 5 or 6).
To select a stored station: Press one of the number buttons (4, 5 or 6).
USB input terminal
Accessory of the iPod/iPhone*
JS_JVC_KD_X360BTS_K_EN_4.indd 10 6/1/2018 3:52:12 PM