4
BASICS
Faceplate
KD-X260BT/
KD-SX25BT
Volume knob
USB input
terminal
Detach button
Display window
Auxiliary
input jack
Attach Detach How to reset
Reset the unit
within 5 seconds
after detaching the
faceplate.
To On the faceplate
Turn on the power
Press B SRC.
• Press and hold to turn off the power.
Adjust the volume Turn the volume knob.
Select a source
Press B SRC repeatedly.
Change the display information
Press
repeatedly.
BEFORE USE
IMPORTANT
• To ensure proper use, please read through this Guide before using
this product. It is especially important that you read and observe
Warnings and Cautions in this Guide.
• Please keep the Guide in a safe and accessible place for future
reference.
Warning
Do not operate any function that takes your attention away from safe
driving.
Caution
Volume setting:
• Adjust the volume so that you can hear sounds outside the car to
prevent accidents.
• Lower the volume before playing digital sources to avoid
damaging the speakers by the sudden increase of the output level.
General:
• Avoid using the external device if it might hinder safe driving.
• Make sure all important data has been backed up. We shall bear no
responsibility for any loss of recorded data.
• Never put or leave any metallic objects (such as coins or metal
tools) inside the unit to prevent a short circuit.
• Depending on the types of cars, the antenna will automatically
extend when you turn on the unit with the antenna control wire
connected. Turn off the unit when parking at a low ceiling area.
JS_JVC_QSG_KD_X360BTS_K_EN_3.indd 4 6/11/2018 8:31:38 AM
To Next Page
Loading...
Need help?
General
