JVC KD-X270BT User Manual

26
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Bluetooth®
The connectivity result flashes on the display.
“PAIRING OK” and/or “HANDS-FREE OK”*1 and/or “AUD.STREAM OK”*2 and/
or “PBAP OK”*3: Compatible
*1 Compatible with Hands-Free Profile (HFP)
*2 Compatible with Advanced Audio Distribution Profile (A2DP)
*3 Compatible with Phonebook Access profile (PBAP)
After 30 seconds, “PAIRING DELETED” appears to indicate that pairing has
been deleted, and the unit exits check mode.
• To cancel, press and hold B SRC to turn off the power, then turn on the
power again.
Bluetooth — Audio
While in BT AUDIO source, you can connect to five Bluetooth audio devices
and switch between these five devices.
Listen to the audio player via Bluetooth
1
Press B SRC repeatedly to select BTAUDIO (or press SOURCE on the
remote control).
• For KD-X270BT/KD-SX26BT: Pressing enters BT AUDIO directly.
2 Operate the audio player via Bluetooth to start playback.
To On the faceplate On the remote control
Play back/pause Press the volume knob.
Press d.
Select group or
folder
Press 2 J / 1 K. Press J / K.
Reverse skip/
Forward skip
Press S / T. Press H / I.
Reverse/Fast-
forward
Press and hold S / T. Press and hold H / I.
JS_JVC_KD_X470BHS_K_EN_1.indd 26JS_JVC_KD_X470BHS_K_EN_1.indd 26 5/28/2019 1:34:20 PM5/28/2019 1:34:20 PM

JVC KD-X270BT Specifications

General

Bluetooth	Yes
USB Input	Yes
Aux Input	Yes
Preamp Outputs	2-channel
Peak Power Output	50 watts x 4 channels
RMS Power Output	22 watts x 4 channels
DIN Size	Single DIN
CEA-2006 Compliant	Yes
Subwoofer Preamp Output	Yes
Preamp Voltage	2.5 volts
Display Type	LCD
Radio Tuner	AM/FM
MP3 Playback	Yes
WMA Playback	Yes
FLAC Playback	Yes
Android Compatibility	Yes
iPhone Compatibility	Yes
Steering Wheel Control Compatible	Yes
Preset EQ	Yes
Built-in Microphone	Yes
Wireless Audio Streaming	Yes
Built-in EQ	Yes
Compatible Audio Formats	MP3, WMA, FLAC