EasyManuals Logo

JVC KD-X270BT User Manual

JVC KD-X270BT
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
28
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Option B: Manual Pairing
1 Start up the Alexa mobile application and go to the “Devices” tab.
2 Tap the “ + “ icon at the top right corner.
3 Tap “Add Device”.
4 Tap “Automotive Accessory” or “Headphones” from the list of device
types.
5 Tap the name of your receiver (“KD-X470BHS”/“KD-X370BTS”/
“KD-X37MBS”) and follow the instructions.
Once the setup process is completed, the Alexa mobile application will
establish a connection with this unit.
The Alexa connection can be disconnected if:
A2DP profile is disconnected
Bluetooth is disconnected
This unit is turned off
Any other conditions depending on the connected device.
To establish Alexa connection again, reconnect the A2DP profile.
Alexa connection cannot be established again if you:
Reinstall Alexa mobile application
Delete the paired device and perform pairing again (for Android device)
To establish Alexa connection again, perform the setup process again.
You can check the Alexa connection from the Alexa mobile application.
If the name of this unit appears on the screen of “ALL DEVICES”, you do not
need to perform setup process again.
Basic operations
Once Alexa connection is established...
1 Press on the unit to speak with Alexa.
The display shows: “ALEXA” “LISTENING...”.
2 Communicate with Alexa via the connected microphone. (Page20)
“THINKING...” appears when Alexa is processing your voice input.
“SPEAKING...” appears while Alexa is responding to your voice input.
“ALEXA” or display information such as playing time, song title, and etc.
appears while Alexa is in idle state.
To return to the previous source before ALEXA, press B SRC (or press
SOURCE on the remote control).
To activate Alexa, press
.
To cancel current listening state, press
.
To cancel current thinking/speaking states and go to listening state, press
.
Only one Alexa connection can be connected at one time.
“DISCONNECTED” appears if the unit is disconnected from Alexa mobile
application or the Bluetooth connection is disconnected.
AMAZON ALEXA
(for KD-X470BHS/KD-X370BTS/KD-X37MBS)
JS_JVC_KD_X470BHS_K_EN_4.indd 28JS_JVC_KD_X470BHS_K_EN_4.indd 28 10/2/2019 9:38:05 AM10/2/2019 9:38:05 AM

Table of Contents

Other manuals for JVC KD-X270BT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-X270BT and is the answer not in the manual?

JVC KD-X270BT Specifications

General IconGeneral
BluetoothYes
USB InputYes
Aux InputYes
Preamp Outputs2-channel
Peak Power Output50 watts x 4 channels
RMS Power Output22 watts x 4 channels
DIN SizeSingle DIN
CEA-2006 CompliantYes
Subwoofer Preamp OutputYes
Preamp Voltage2.5 volts
Display TypeLCD
Radio TunerAM/FM
MP3 PlaybackYes
WMA PlaybackYes
FLAC PlaybackYes
Android CompatibilityYes
iPhone CompatibilityYes
Steering Wheel Control CompatibleYes
Preset EQYes
Built-in MicrophoneYes
Wireless Audio StreamingYes
Built-in EQYes
Compatible Audio FormatsMP3, WMA, FLAC

Related product manuals