EasyManuals Logo
Home>JVC>Receiver>KD-X451DBT

JVC KD-X451DBT User Manual

JVC KD-X451DBT
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
14
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
To On the faceplate
While having two active calls...
End current call and
activate held call
Press and hold
or the volume knob.
Swap between the current
call and held call
Press
.
Adjust the phone volume
*
1
[00]
to
[35]
(Default:
[15]
)
Turn the volume knob during a call.
Switch between hands-free
and private talk modes
*
2
Press during a call.
*
1
This adjustment will not affect the volume of the other sources.
*
2
Operations may vary according to the connected Bluetooth device.
Improve the voice quality
While talking on the phone...
1 Press and hold .
2 Turn the volume knob to select an item
(
see the following table
)
, then
press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press
.
Default:
XX
MIC GAIN LEVEL –10
to
LEVEL +10
(
LEVEL –04
):The sensitivity of the
microphone increases as the number increased.
NR LEVEL LEVEL –05
to
LEVEL+05
(
LEVEL 00
):Adjust the noise reduction
level until the least noise is being heard during a phone conversation.
ECHO CANCEL LEVEL –05
to
LEVEL +05
(
LEVEL 00
):Adjust the echo cancellation
delay time until the least echo is being heard during a phone
conversation.
Make the settings for receiving a call
1
Press to enter Bluetooth mode.
2 Turn the volume knob to select an item (see the following
table), then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
To return to the previous setting item, press
.
Default:
XX
SETTINGS
AUTO ANSWER
01 SEC
to
30 SEC
:The unit answers incoming call automatically in
the selected time (in seconds).;
OFF
:Cancels.
RING COLOR COLOR 01
to
COLOR 49
(
COLOR 08
): Selects the illumination color
for the buttons as notification when there is an incoming call and
during a call.;
OFF
:Cancels.
BATT/SIGNAL
*
AUTO
:Shows the strength of the battery and signal when the unit
detects a Bluetooth device and the Bluetooth device is connected.;
OFF
:Cancels.
*
Functionality depends on the type of the phone used.
BLUETOOTH®
JS_JVC_KD_X451DBT_E_EN_int1.indd 14JS_JVC_KD_X451DBT_E_EN_int1.indd 14 9/6/2017 3:54:05 PM9/6/2017 3:54:05 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-X451DBT and is the answer not in the manual?

JVC KD-X451DBT Specifications

General IconGeneral
Display typeLCD
Built-in displayYes
Display number of lines2 lines
DIN size1 DIN
Output power350 W
Product colorBlack
Disc types supportedNo
Audio output channels- channels
Equalizer bands quantity13
Maximum power per channel50 W
Mobile operating systems supportedAndroid, iOS
USB version2.0
Bluetooth version3.0+HS
Bluetooth profilesA2DP, AVRCP
USB ports quantity1
Audio formats supportedFLAC, MP3, WAV, WMA
AM band range531 - 1611 kHz
FM band range87.5 - 108 MHz
LW band range153 - 279 kHz
Supported radio bandsDAB, DAB+, FM, LW, MW
Preset stations quantity40
Hands-free callingKeep your hands on wheel with Bluetooth™ Hands-free calling. After pairing your compatible Bluetooth mobile phone to your TomTom GPS, you’ll be able to see incoming call information, make and answer calls, and talk hands-free through your device. You’ll e
Package weight900 g
Weight and Dimensions IconWeight and Dimensions
Depth100 mm
Width182 mm
Height53 mm
Weight600 g

Related product manuals