JVC KD-X482DBT User Manual

8
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Bluetooth®
• Depending on the Bluetooth version, operating system and the
firmware version of your mobile phone, Bluetooth features may not
work with this unit.
• Be sure to turn on the Bluetooth function of the device to make the
following operations.
• Signal conditions vary depending on the surroundings.
Connect the microphone
Connect the supplied microphone to the microphone input jack on the rear
panel.
Adjust the
microphone
angle
Secure using cord
clamps (not supplied)
if necessary.
Pair and connect a Bluetooth device for the first time
1 Press B SRC to turn on the unit.
2 Search and select the name of your receiver (“KD-X482DBT”) on the
Bluetooth device.
3 Perform (A) or (B) depending on what appears on the display.
For some Bluetooth devices, pairing sequence may vary from the steps
described below.
(A) “[Device Name]”
“XXXXXX” “VOL–YES” “BACK–NO”
“XXXXXX” is a 6-digit passkey randomly generated during each pairing.
Ensure that the passkeys appear on the unit and Bluetooth device
are the same.
Press the volume knob to confirm the passkey.
Operate the Bluetooth device to confirm the passkey.
(B) “[Device Name]”
“VOL–YES” “BACK–NO”
Press the volume knob to start pairing.
• If “PAIRING” “PIN 0000” scrolls on the display, enter the PIN code
“0000” into the Bluetooth device.
• If only “PAIRING” appears, operate the Bluetooth device to confirm
pairing.
“PAIRING COMPLETED” appears when pairing is completed and “
” will light
up when the Bluetooth connection is established.
Answer a call
Press or the volume knob.
• To adjust the phone volume [00] to [35] , turn the volume knob.
• To end a call, press and hold or the volume knob.
Audio player via Bluetooth
1 Press B SRC repeatedly to select BTAUDIO.
2 Operate the audio player via Bluetooth to start playback.
To On the faceplate
Play back/pause Press the volume knob.
Select group or folder
Press 2 J / 1 K.
Reverse skip/Forward skip
Press S / T.
Reverse/Fast-forward
Press and hold S / T.
Repeat play
Press 4  repeatedly.
Random play
Press 3  repeatedly.
KD-X482DBT_E_B5K-0883-00_EN_2nd Draft.indd 8KD-X482DBT_E_B5K-0883-00_EN_2nd Draft.indd 8 26/8/2021 12:09:17 PM26/8/2021 12:09:17 PM

JVC KD-X482DBT Specifications

General

DIN size	1 DIN
Clock mode	12h/24h
Output power	200 W
Product color	Black
Volume control	Rotary
Disc types supported	No
Audio output channels	7.1 channels
Maximum power per channel	50 W
Mobile operating systems supported	Yes
Audio formats supported	FLAC, MP3, WAV, WAVE, WMA
Display type	LCD
Illumination color	Blue, Red
USB version	2.0/3.2 Gen 1 (3.1 Gen 1)
Bluetooth version	4.2
USB port position	Front
Bluetooth profiles	AVRCP
USB connector type	USB Type-A
USB ports quantity	1
Bluetooth functions	Audiostreaming, Automatic pairing for Android, Automatic pairing for iPhone, Handsfree calling
FM band range	87.5 - 108 MHz
LW band range	153 - 279 kHz
FM usable sensitivity	6.2
Supported radio bands	DAB, FM, LW, MW
Preset stations quantity	42
Hands-free calling	Keep your hands on wheel with Bluetooth™ Hands-free calling. After pairing your compatible Bluetooth mobile phone to your TomTom GPS, you’ll be able to see incoming call information, make and answer calls, and talk hands-free through your device. You’ll e

Weight and Dimensions

Depth	100 mm
Width	182 mm
Height	53 mm
Weight	600 g