JVC KW-NSX700 - Display Settings; Input Settings

48
ENGLISH
Menu item Selectable setting/item Initial: Underlined
Display
Dimmer z Auto
z On
z Off
z Dimmer
Time Set
: Dims the screen and button illumination when you turn
on the headlights.
• The ILLUMI lead connection is required. ( page 72 )
: Activates dimmer.
: Cancels.
: Sets the Dimmer On (
)/Off ( ) times.
• Press [5] or [∞] to set the time.
Display Design Change the display design (background, the color of text, touch panel
buttons, and monitor panel buttons). ( page 41)
OSD Clock
z On
z Off
: Displays the clock while a video source is played back.
: Cancels.
Demonstration
z On
z Off
: Activates the demonstration on the screen.
: Cancels.
Scroll
z Auto
z Once
z Off
: Repeats scrolling.
: Scrolls the displayed information once.
: Cancels.
• Touching an information bar scrolls the text regardless of this setting.
GUI Adjust Adjust the brightness and blackness of the screen.
Press [Enter] to display the setting screen, select [ ] (dimmer on)/[ ]
(dimmer off), then change the following settings:
z Brightness
z Black
: Adjusts brightness (–15 to +15; Initial 00 for Dimmer
On/+15 for Dimmer Off).
: Adjusts blackness (–15 to +15; Initial 00).
NTSC/PAL*
1
Select the color system of the external monitor.
z NTSC, PAL
Input
Smartphone*
2
Select the protocol to transmit data from your smartphone. ( page 35)
z MHL
z MirrorLink
: Connects to a smartphone via MHL.
: Connects to a smartphone via MirrorLink.
AV Input *
3
*
4
You can determine the use of LINE IN/VIDEO IN jacks. ( page 73 )
z AV-IN : Select to use the external component connected to
LINE IN/VIDEO IN jacks or the iPod/iPhone connected by
using USB 2.0 cable.
z iPod : Select to use the iPod/iPhone connected by using JVC
KS-U30.
*
1
“Please Power Off” appears when the setting is changed. Turn off the power, then turn on to enable the change.
*
2
This setting cannot be changed when a smartphone is connected.
*
3
To change the setting, turn off the AV source by pressing [AV Off] on the <HOME> screen beforehand. <AV Input>
can be changed only when <Input> in <Display Input> is set to [Smartphone] or [Off].
*
4
When <AV Input> is set to [AV-IN], the video from iPod/iPhone is not displayed on the screen.
EN_KW-NSX700/600[J].indb 48 12/11/14 14:24