JVC KW-V130BT - iPod;iPhone - Device Setup; Preparation; Selecting the connection method of iPod;iPhone

18
iPod/iPhone
iPod/iPhone
Preparation
R Connecting iPod/iPhone
• For details about connecting iPod/iPhone, see
page63.
• For playable iPod/iPhone types, see page67.
Connect your iPod/iPhone according to your
purpose or the type of iPod/iPhone.
• To listen to music:
– For Lightning connector models: Use USB Audio
cable for iPod/iPhone—KS-U62.
– For 30-pin connector models: Use 30-pin to USB
cable (accessory of iPod/iPhone).
• To watch video and listen to music (only for
30-pin connector models): Use USB Audio and
Video cable for iPod/iPhone—KS-U59 (optional
accessory).
– For Lightning connector models: You cannot
watch video with KS-U59.
R Selecting the connection method of
iPod/iPhone
1 Turn off the AV source (Page6)
2 Display the <System> setting screen.
On the Home screen:
3
[USB 1 Wire] Select this when the iPod/
iPhone is connected using
KS-U62 (optional accessory) or
30-pin to USB cable (accessory
of iPod/iPhone).
[USB+AV-IN] Select this when the iPod/
iPhone is connected using
KS-U59 (optional accessory).
Playback operations
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page50.
R Indications and buttons on the source
control screen
21
47563
Playback information
1 Artwork (Shown if the song contains artwork)
2 Song/video information
• Pressing [H] scrolls the text if not all of the text
is shown.
3 Playing time
4 Playback status
5 Playback mode (Page19)
6 File type
7 Track no./Total track number
2017KW-VEntryK.indb18 2016/06/0221:22