JVC KW-V130BT - SiriusXM Satellite Radio - Preset Channel Management; Presetting channels; Selecting a preset channel

30
SiriusXM® Satellite Radio
SiriusXM® Satellite Radio
Operation buttons
[SXM1] –
[SXM4]
Selects the band.
[ ]
Displays the other operation button
window.
• To hide the window, press [
].
[Song Title]/
[Info]/
[Category]
Changes the displayed information
each time this button is pressed.
[
]
Displays the preset channel
window. (See the far right column.)
• To hide the window, press [
].
[
]
Displays the <Equalizer> screen.
(Page47)
[
]
Displays the <Channel List> screen.
(Page31)
[IW]
Starts/pauses the content replay.
(Page 31)
[CHK]/[CHJ]
Selects the channel.
[SEEK] Changes the seek mode.
• SEEK1: Skip to another available
channel.
• SEEK2: Skip to another preset
channel.
[SCAN] Starts TuneScan™. (Page32)
[S]/[T]/
[Live]
Used while replaying content.
(Page31)
[MODE] Changes the settings for SiriusXM
Satellite Radio reception on
the <SiriusXM Mode> screen.
(Pages32–34)
• To display all available operation buttons, press
[
] to display the other operation button window.
Presetting channels
R Storing channels in the memory
You can preset 5 channels for each band.
1 Tune in to a channel you want to preset.
(See the left column.)
2 Select a preset number.
(Hold)
The channel selected in step 1 is stored.
R Selecting a preset channel
1 Select the band (1), then display the
preset channel window (2).
• You can also select a preset channel by
pressing [P1] – [P5].
2 Select a preset channel.
• Pressing [H] scrolls the text if not all of the
text is shown.
• To hide the window list, press [
].
3 Select a preset channel in SEEK2.
2017KW-VEntryK.indb30 2016/06/0221:22