JVC KW-V130BT - SETTINGS - Touch Panel Calibration; Adjusting the touch position

54
SETTINGS
SETTINGS
3
<Application
Version>
Updates the system
application.
<System Version> Updates the system.
<DVD Version> Updates the DVD system
application.
It may take a while.
If the update has been completed successfully,
“Update Completed” appears. Reset the unit.
• Do not disconnect the USB device while updating.
• If the update has failed, turn the power off and
then on, and retry the update.
• Even if you have turned off the power during the
update, you can restart the update after the power
is turned on. The update will be performed from
the beginning.
R Adjusting the touch position
You can adjust the touch position on the touch
panel if the position touched and the operation
performed do not match.
1 Display the <Touch Panel Adjust> screen.
On the Home screen:
• Press [
] repeatedly to change the page on
the <System> menu screen.
2 Touch the center of the marks at the upper
left (1), the lower center (2), then the
upper right (3) as instructed.
• To reset the touch position, press [Reset].
• To cancel the current operation, press
[Cancel].
2017KW-VEntryK.indb54 2016/06/0221:22