JVC KW-V200BT - Initial Settings; Initial Setup; Clock Settings

Initial setup
When you power on the unit for the first time or
reset the unit, the initial setting screen appears.
o You can also change the settings on the
<Settings> screen. (Page 44)
1
4
lnrttrtl Sethnq!;·~·- ·-
f.:ll\')ll.'ISJP
AV lnp11l
Camera lnpul
n~·:pt,)· Ot'st~
1
n
Uemoflstrattor.
<Language>
(Page 46)
<AVInput>
(Page 45)
<Camera Input>
(Page 45)
<Display Design>
(Page 45)
<Demonstration>
(Page 45)
F-ngh-;.h
AV.It-J
,p(ld
On
Oft
•
Fnl+!~
On Off
Select the text language
used
for on-screen
information.
o Set <GUI Language>
to display the operation
buttons and menu items
in
the selected language
([Local]: initially
selected)
or English
([English]).
Select an external
component connected
to the AV-IN1 terminal to
play.
Select
[On] when
connecting the rear view
camera.
Select
the background
and
the colors of the text,
touch panel buttons and
the monitor panel buttons.
Activate
or deactivate the
display demonstration.
2 Finish the procedure.
Dcmonstr~lton On Oft
----- ~ Ftmsl• •
The <HOME> screen is displayed.
o [AV Off] is selected initially. Select the
playback source. (Page 8)
Clock settings
1 Display the <HOME> screen.
On the monitor panel:
KW-V40BT KW-V20BT/KW-V200BT/
KW-V1 O/KW-V1 00
On the source control screen:
4 Set the clock time.
5
To synchronize the clock time with FM RBDS
To set the clock manually
CD Select the time display format.
@ Adjust the hour.
® Adjust the minute.