JVC KW-V230BT - iPod;iPhone; Selecting iPod;iPhone device to play and the connection method

ENGLISH 23
iPod/iPhone iPod/iPhone
Bluetooth connection
Pair the iPod/iPhone through Bluetooth. (Page52)
• For Lightning connector models connected to
KW-V630BT : To watch video, connect your iPod/
iPhone to the HDMI/MHL input terminal using
KS-U60 (optional accessory). (Page81 )
• For Lightning connector models connected to
KW-V230BT /KW-V330BT /KW-V430BT and 30-pin
connector models: You cannot watch video with a
Bluetooth connection.
❏ Selecting iPod/iPhone device to play
and the connection method
1 Display the <Settings> screen.
On the Home screen:
KW-V330BT KW-V430BT
KW-V630BT
KW-V230BT
2 Display the <System> setting screen.
3
4 Select the connection method (1), then
confirm the selection ([OK] or [Next]) (2).
[USB 1 Wire] Select this when the iPod/
iPhone is connected using a
USB 2.0 cable (accessory of
the iPod/iPhone) or KS-U62
(optional accessory).
[USB + AV-IN] Select this when the iPod/
iPhone is connected using
KS-U59 (optional accessory).
[Bluetooth] Select this when the iPod/
iPhone is connected via
Bluetooth. (Go to step 5.)
[HDMI +
Bluetooth]*
Select this when the iPod/
iPhone is connected using
HDMI cable KS-U60 (optional
accessory) and KS-U62 (optional
accessory) through a Lightning-
Digital AV adapter (accessory of
the iPod/iPhone). (Go to step 5.)
5 When selecting [HDMI + Bluetooth]* or
[Bluetooth] as the connection method:
Select the device (1), then press [OK] to
connect (2).
• If the device is already connected, skip step 1.
* Appears only for KW-V630BT .
2017KW-VEntryK.indb232017KW-VEntryK.indb23 2016/12/0915:112016/12/0915:11