JVC KW-V230BT - INITIAL SETTINGS; Initial setup; Clock settings

4
INITIAL SETTINGSINITIAL SETTINGS
Initial setup
When you power on the unit for the first time or
reset the unit, the initial setting screen appears.
• You can also change the settings on the
<Settings> screen. (Page71)
1 Perform the initial settings.
<Demonstration>
(Page72)
Activate or deactivate the
display demonstration.
<Language>
(Page73)
Select the text language
used for on-screen
information.
• Set <GUI Language>
to display the operation
buttons and menu items
in the selected language
([Local]) or English
([English]).
<Rear Camera>
(Page48)
Configure the settings to
display the picture from
the connected rear view
camera.
<User
Customize>
(Page66)
Change the display design.
<Viewing Angle>
(Page72)
Select the viewing angle
in relation to the monitor
panel to make the panel
easier to see.
2 Finish the procedure.
The Home screen is displayed.
Clock settings
1 Display the Home screen.
On the monitor panel:
KW-V330BTKW-V230BT
KW-V430BT/KW-V630BT
2 Display the <Settings> screen.
KW-V330BT KW-V430BT
KW-V630BT
KW-V230BT
3 Display the <System> setting screen.
4 Display the <Clock> screen.
• You can also display the <Clock> setting
screen by touching the clock area on the
Home screen.
2017KW-VEntryK.indb42017KW-VEntryK.indb4 2016/12/0915:112016/12/0915:11