JVC KW-V230BT - BLUETOOTH; Pairing a Bluetooth device using a PIN code

ENGLISH 53
BLUETOOTHBLUETOOTH
Pairing a Bluetooth device using a PIN code (for
Bluetooth 2.0)
1 Display the <Settings> screen.
On the Home screen:
KW-V330BT KW-V430BT
KW-V630BT
KW-V230BT
2 Display the <System> setting screen.
3 Display the <Bluetooth Setup> screen.
• You can also display the <Bluetooth Setup>
screen by pressing [ ] on the phone control
screen. (Page56)
4 Change the PIN code.
• If you wish to skip changing the PIN code, go
to step 3.
• The PIN code is initially set to “0000”.
• The maximum number of digits in the PIN
code is 15.
• Press [Clear] to delete the last entry.
• Press and hold [Clear] to delete the PIN code.
5 Search for the unit (“JVC KW-V”) from
your Bluetooth device.
6 Select the unit (“JVC KW-V”) on your
Bluetooth device.
• If a PIN code is required, enter “0000” (initial).
When pairing is complete, the device is listed on
the <Paired Device List>.
• To use the paired device, connect the
device on the <Paired Device List> screen.
(Page54)
2017KW-VEntryK.indb532017KW-VEntryK.indb53 2016/12/0915:112016/12/0915:11