JVC KW-V41BT - Page 24

24
BLUETOOTHBLUETOOTH
Pairing a Bluetooth device using a PIN code (for
Bluetooth 2.0)
1 Display the <Bluetooth Setup> screen.
On the Home screen:
• Press [ K] repeatedly to change the page on
the <System> menu screen.
2 Change the PIN code.
• If you skip changing the PIN code, go to step
3.
• The PIN code is initially set to “0000”.
• The maximum number of digits in the PIN
code is 16.
• Press [Clear] to delete the last entry.
3 Search “JVC KW-V” from your Bluetooth
device.
4 Select “JVC KW-V” for your Bluetooth
device.
JVCKW-V
• If the PIN code is required, enter “0000”
(initial).
PINcode
OK
0000
When pairing is complete, the device is listed on
<Paired Device List>.
• To use the paired device, connect the device
on <Paired Device List>. (Page25)
KW-VEntryU.indb24KW-VEntryU.indb24 2014/09/1019:502014/09/1019:50