JVC KW-V41BT - Page 41

ENGLISH 41
REMOTE CONTROLLERREMOTE CONTROLLER
Operations using the remote
controller (RM-RK258)
R Basic button functions
ATT Attenuates/restores the sound.
DISP
Switches the screen.
• The screen switched to depends on
the <Input> setting in <Navigation
Input> (for KW-V41BT/KW-V21BT)
(Page22) or <Navigation Input>
setting for KW-V11 (Page38).
FM/J /
AM/K
• Selects the preset stations.
• Selects a title/item/folder.
/
• Searches for stations automatically.
• Searches for stations manually. (Hold)
• Selects a track.
• Reverse search/forward search. (Hold)
VOL +/
VOL –
Adjusts the volume level.
SRC Selects the source.
I/W
Starts/pauses*
1
playback.
Answers incoming calls.*
2
0 – 9
Enters a number. (See the far right
column.)
1 – 6 Enters preset station number.
ANGLE Tilts the monitor panel.*
3
ASPECT
Changes the aspect ratio.
• To check the current aspect ratio
setting, operate on the touch panel.
(Page33)
ENT Confirms selection.
DIRECT
Enters direct search mode. (See the right
column.)
CLR Erases the misentry.
*
1
Does not work while listening to Bluetooth audio.
*
2
Available for KW-V41BT/KW-V21BT only.
*
3
Available for KW-V41BT only.
R Searching for an item directly
Tuner frequency
1 Press DIRECT to enter the search mode.
2 Press number buttons to enter a frequency.
• To erase a misentry, press CLR (clear).
3 Press ENT to confirm the entry.
Chapter/title/folder/file/track on the disc/USB
1 Press DIRECT to enter the search mode.
• Each time you press DIRECT, the item to search
for changes.
2 Press a number button to select a desired item.
• To erase a misentry, press CLR (clear).
3 Press ENT to confirm the selection.
R Disc operations
Using the VCD menu
During PBC playback...
1 Press DIRECT to enter the search mode.
2 Press a number button to select the item you
want to play.
3 Press ENT to confirm the selection.
KW-VEntryU.indb41KW-VEntryU.indb41 2014/09/1019:502014/09/1019:50