ENGLISH
10
Listening to the CD changer
It is recommended to use a JVC MP3-compatible CD changer with your unit. You can connect a CD changer to the CD
changer jack on the rear of the unit. See also page 14.
• You can only play conventional CDs (including CD Text) and MP3 discs.
Before connecting the CD changer
• To prevent short circuits, it is recommended to disconnect the car battery’s negative terminal and make all
electrical connections before connecting the CD changer.
• When mounting this unit into your car, be sure to use the screws provided.
• When tightening screws or bolts, be careful not to pinch any connection cord.
• If you are not sure how to connect the CD changer correctly, consult your car dealer or have it installed by a
qualified technician.
Preparation
Make sure “CHANGER” is selected for the external input setting, see page 17.
~ Select “CD-CH.”
Ÿ Select a disc to start playing.
Press: For selecting disc number 1 – 6.
Hold: For selecting disc number 7 – 12.
Change the display information
(see page 8)
EN08-13_XG506S_001A_1.indd 10EN08-13_XG506S_001A_1.indd 10 9/3/07 5:28:45 PM9/3/07 5:28:45 PM
To Next Page
Loading...
