(No.YA299)1-13
3.1.11 REMOVING THE SPEAKER (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 6 screws [A], then remove the SPEAKER (L /R).
NOTE:
• Since the speaker is attached in a certain direction, attach
the speaker in the same correct direction as it has been
attached.
• When the speaker is decomposed, the performance cannot
be kept.
3.1.12 REMOVING THE FRONT LED PWB (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
• Remove the FAN BRACKET.
(1) Remove the 2 screws [B], then remove the FRONT LED
PWB.
3.1.13 REMOVING THE LCD PANEL UNIT (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
• Remove the FAN BRACKET.
(1) Remove the 2 screws [C], then remove the MAIN BASE.
(2) Remove the 3 screws [D], the 2 screws [E] and the 1 screw
[F], then remove the TOP FRAME.
(3) Remove the 2 screws [G] and the 2 screws [H], then
remove the BOTTOM FRAME.
(4) Remove the LCD PANEL UNIT from the FRONT PANEL.