JVC LT-42G80BU - Initial settings; Setup Process Overview

9
ENGLISH
10
02
AUTO PROGRAM
0%
CH
LANGUAGE
COUNTRY
EDIT
01
AV
PR
02
03
04
05
06
07
08
09
ID CH/CC
BBC1
_ _ _ _
_
CH
02
CH
03
CH
04
CH
05
CH
06
CC
01
CC
02
CC
03
CC
04
DOWNLOAD TV RECORDING DEVICE
T-V LINK
IMPORTANT! PREPARE USE
SETTINGS
TROUBLE?
Initial settings
Set the menu language, installation location and automatically register the TV channels.
These channels can be edited later in “Editing channels” (P. 11).
(Channel data on the TV can be sent to a connected recording device that is compatible with “T-V LINK”.)
 To the previous screen

 If the “JVC” logo does not appear or
if you wish to make changes later
 “LANGUAGE” and “AUTO PROGRAM”
(P. 26)
 Exit

MENU
What is “T-V LINK”?
Connecting the TV to a “T-V LINK”
compatible device allows :
 Channels on the TV to be instantly
registered on the device.
 The “DIRECT REC” function to be
used.
 “Technical information” (P. 32)
 “T-V LINK” variations
“T-V LINK” (JVC) “Q-LINK” (Panasonic)
“Megalogic” (Grundig) “Data Logic” (Metz)
“SMARTLINK” (Sony) “Easy Link” (Philips)
Select a language
Select the country of installation
Automatically register channels
Check what was registered
select
1 select
 For the next page 
 Edit channels
 ⁄ in “Editing channels”
(P. 11)
 When not using “T-V LINK”  When using “T-V LINK”
 If “FEATURE NOT
AVAILABLE” appears :
 Is the “T-V LINK” compatible
device connected to “EXT-2”?
 Is the device turned on?
Finish
3
2
5
6
 Confirm
2 next
(Yellow)
Begin
 Shown only when
powering on for the first time.
 The power on the unit can also be used.
1
4
BACK
TV
 The remote control
doesn’t work
 Confirm the mode is set to
“TV”.
(blue)
9-10 3/13/2007 2:40:47 PM