1-28 (No.MB011)
3.4.2 Reassembling the playback / recording & eraser head
(See Fig. 4 to Fig. 6)
(1) Keep the direction lever of head mount assembly to left
side (head direction is forward direction).
(2) Fix the head mount assembly boss O', P', Q', U' and V' to
mechanism sub assembly hole P, V and ditch O, U and Q
(See Fig. 4 and Fig. 5).
(3) Fix the reversing azimuth screw.
(4) Attaching the spring a from back side of playback /
recording & eraser head.
(5) Attaching the flexible board to the chassis base.
Fig.4
Fig.5
Fig.6
O'
P'
V'
Q'U'
Direction
lever
Head mount assembly
Head mount assembly
Direction
cover
O
P
Q
U
Head mount
Reverse
azimuth screw
R/P & E head
or PB head
Spring a
Flexible
board
FPC holder
Head amp. & mechanism
control board
A:CN301
B:CN302
To Next Page
Loading...
