To Next PageTo Next Page
Need help?Do you have a question about the JVC MX-G850V and is the answer not in the manual?
General| CD Player | Yes |
|---|---|
| FM/AM Tuner | Yes |
| Bluetooth | No |
| USB Playback | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| Remote Control | Yes |
| Tape Deck | Yes |
| Surround Sound | No |
| Speaker Configuration | 2.0 |
Covers product design integrity, safety-related parts, lead routing, and electrical shock hazard testing procedures.
Details grounding techniques for workbenches and personnel to prevent damage to electronic components.
Covers proper handling of optical pickups, including diode protection and traverse unit sensitivity.
Explains CLASS 1 LASER PRODUCT, dangers of invisible laser radiation, and safety interlocks.
Discusses safety switches preventing radiation emission and hazards of defeating them.
Step-by-step instructions for removing the main unit's metal cover by unscrewing and lifting.
Procedures for disconnecting wires, rivets, and screws to detach the CD changer mechanism assembly.
Details on disconnecting wires, removing bands, screws, and releasing joints to remove the front panel.
Instructions for disconnecting card wires and screws to safely remove the main board.
Lists essential instruments like oscillators, voltmeters, frequency counters for product adjustment.
Specifies voltage, input signals, volume settings, and critical safety precautions during measurements.
Details on adjusting head azimuth, tape speed, and bias for optimal tape recording performance.
Illustrates the sequence of operations from power on to TOC reading with key check points.
Covers cleaning the pickup lens, identifying laser diode wear symptoms, and replacing the laser pickup.
Provides block diagrams and pin functions for key ICs, including PB/REC amps and RF head amps.
