JVC RC-EX25S - Page 45

15
English
Presetting stations
You can preset 10 FM and 10 AM stations.
PUSH
PLA
Y/P
AUSE
STOP
M
U
TING
H
B
S
/
P
RES
E
T E
Q
P
R
O
G
R
A
M
/
C
L
O
C
K
S
E
T
A
d
d
"
/"
F
M
M
O
D
E
DISPLAY
TAPE
CD
BAND
REMOTE
SENSOR
CD/
RANDOM
TAPE
FM MODE
INTRO STOP
HBS/
PRESET EQ
MUTING
STANDBY/ON DISPLAY
+
VOLUMEPRESET
–
TUNER/
BAND
CD PLAY
/PAUSE
RM-SRCEX25A REMOTE CONTROL
RANDOM
TUNER
PRESET
CD REPEA
T
+
–
CD REPEAT/
2,6 3,5,6 2,6 14,64,61
There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 3
again.
Note:
In some cases, test frequencies have been already
memorized for the tuner since the factory examined the
tuner preset function before shipment. This is not a
malfunction. You can preset the stations you want into
memory by following the presetting method.
1 Press BAND/TUNER to select the band, FM or
AM.
2 Press 4 or ¢ to tune in the station you want to
preset.
3 Press PROGRAM/CLOCK SET.
The PROG indicator starts blinking in the display
window.
TUNER
PROG
FM
MHz
4 Press PRESET + / CD REPEAT or PRESET – to
select the preset number.
You can press CD REPEAT / PRESET + or PRESET
– on the remote control unit to select the preset
number.
TUNER
PROG
FM
MHz
Preset number
5 Press PROGRAM/CLOCK SET.
The tuned station in step 2 is stored in the preset
number selected in step 4.
Storing a new station on a used number erases the
previously stored one.
6 Repeat steps 2 to 5 to preset other stations, using
different preset numbers.
Tuning in a preset station
1 Press BAND/TUNER to select the band, FM or
AM.
2 Press PRESET + / CD REPEAT or PRESET –
repeatedly until the desired preset number
appears.
Note:
If you unplug the AC power cord or if a power failure
occurs, the preset stations will be erased in a few days. If
this happens, preset the stations again.
02_01-22_RC-EX25S_E_En.p65 04.4.23, 4:25 PM15