JVC RC-QN1 - Page 17

RC-QN1/QN2/QN3
4-24
RC-QN3 Only
The timers let you. control listening functions.automatically.
You can set the clock when the Unit is turned on.
Notes:
¢ The clock must be correctly set for the timers to work..
¢ When setting the timers, you have two minutes in which to
complete the procedure. Otherwise, the setting is cleared and
must be repeated from the beginning.
(For 2 seconds) (Display “CLOCK”’) (Select the time).
2vess the CLOCK/TIMER button on the Unit
and hold for more than two seconds.
Turn the JOG dial until the “CLOCK” indica-
tor blinks on the display.
The display changes as follows:
The “CLOCK” indicator stays lit. The Unit’s current set time
blinks on the display.
Turn the JOG dial to set the time.
Turn the JOG dial to the right or left to increase or decrease the
time. Turning it rapidly advances or decreases the time faster.
Then wait for 5 seconds or press the CLOCK/TEMER button
once again to return to the original display. The selected time is
set and the seconds start counting from 0.
CAUTION: If there is a power failure, the cleck
loses its setting after approx. five minutes. The
display shows “00:00” and the “CLOCK” indicator
blinks, and the clock must be reset.
Once you have set the Daily Timer. The timer will be activated at the
same time every day. You can cancel or re-activate the Daily Timer.
Note that the Timer indicator ( @}) on the display shows that the
Daily Timer you have set 1s in effect.
10
JOG dial
CLOCK/TIMER
Timer indicator
Analog clock
(Display when using the Timer)
Note: Perform each setting within 30 seconds. Otherwise, setting
is cleared and must be repeated from the beginning.
ress the. (| button to turn on the Unit.
_ Setting the ON time (Example: 7:00)
1. Press the CLOCK/TIMER button on the Unit and hold for
more than:2 seconds.
2. Turn the JOG dial until the “@}°% ” indicator blinks on the
display.
3. Press the CLOCK/TIMER button.
The current ON time blinks onthe display.
4. Turn the JOG dial to set the time you want the Unitto come on.
Turn the JOG dial to the right or left to advance or decrease
the time.
Turning it rapidly advances or decreases the time faster.
etting the OFF time (Example: 10:15)
Press the CLOCK/TIMER button on the Unit.
The “ @}” indicator lights ‘up-and the current OFF time
blinks on the display.
2. Tum the JOG dial to set the time you want the Unit to be
turmed off.
\ \®orr \ Gore
Wr wee an ae |
htt tit tt
oS eu Ss
setting the volume t
1. Press the CLOCK/TIMER button on the Unit.
The Timer indicator is lit and the current volume setting.
blinks ‘on the display.
2. Turn the JOG dial to the right or left to increase or decrease
the volume level.
Volume setting range: 0 - 25 or -.
32
rt
vy UL
ss the CLOCK/TIMER button on the Unit.
The timer setting is completed and the display returns to the dis-
play before you set the timer. The Timer.indicator stays lit..
_ Before turning off the Unit, prepare the
music source.
Tuner: Tune in to the desired station.
CD: Load a CD.
Tape: Load a prerecorded cassette tape.