JVC RV-NB50B - Board and Mechanism Removal

1-6 (No.MB723<Rev.003>)
(5) Disconnect the connector wire from Power supply board
connected to connector CN301 of the Main board. (See
Fig.5)
Fig.5
3.1.3 Removing the SMPS board (See Fig.6, 7)
(1) Remove the two screws E attaching the SMPS board. (See
Fig.6)
Fig.6
(2) Disconnect the connector wires from Power supply board
connected to connectors of SMPS board. (See Fig.7)
Fig.7
3.1.4 Removing the Power supply board (See Fig.8)
(1) Remove the two screws F and two screws G attaching the
Power supply board.
Fig.8
3.1.5 Removing the CD mechanism (See Fig.9, 10, 11, 12)
(1) Disconnect the connector wire from Left speaker connect-
ed to connector CN102
of the Main board. (See Fig.9)
Fig.9
(2) Disconnect the connector wire from Right speaker con-
nected to connector CN103
of the Main board. (See Fig.10)
Fig.10
CN301
E
connector
FG
CN102
CN103