JVC SP-THC6S - User Manual

Questions and Answers:

P
Priscilla WilliamsonAug 12, 2025
Why is there no sound coming from my JVC SP-THC6S Home Theater System?
- J
  jenniferromeroAug 13, 2025
  If you're not getting any sound from your JVC Home Theater System, there are several things to check: First, make sure the system cord and speaker cords are properly connected. Next, verify that the audio cord is correctly connected to AUDIO IN (VCR) and/or DIGITAL IN (DBS). Ensure that you've selected the correct source and the proper decode mode on your system.
A
Abigail MartinezAug 16, 2025
What to do if JVC Home Theater System remote control does not work?
- E
  eric12Aug 16, 2025
  If your JVC Home Theater System remote control isn't working, the first thing to check is the batteries. If they're exhausted, replace them. Also, make sure that direct sunlight isn't falling on the remote sensor, as this can interfere with its operation. If sunlight is the issue, simply shield the sensor from the direct light.
K
Kenneth RobertsAug 19, 2025
What to do if no picture is displayed on the TV screen with JVC SP-THC6S?
- S
  Shannon RyanAug 20, 2025
  If there's no picture displayed on your TV screen when using your JVC Home Theater System, ensure the video cord is correctly connected. Also, verify that the disc you're trying to play is a playable disc.
V
Vincent ColemanAug 23, 2025
How to adjust the picture to fit the TV screen on my JVC SP-THC6S Home Theater System?
- L
  lambertrobertAug 23, 2025
  If the picture from your JVC Home Theater System doesn't fit the TV screen, it might be due to an incorrect monitor type setting. You should set “MONITOR TYPE” properly.
K
Kathryn WilliamsAug 27, 2025
Why are the video and audio distorted on my JVC SP-THC6S Home Theater System?
- A
  Angela SmithAug 27, 2025
  If the video and audio are distorted on your JVC Home Theater System, the disc might be the problem. Try replacing or cleaning the disc. Also, if you have a VCR connected between the center unit and the TV, connect the center unit and TV directly.
J
Jonathan Bowers Jr.Aug 31, 2025
What to do if the picture is blurred or divided into two parts on JVC SP-THC6S Home Theater System?
- T
  Tammy WilsonAug 31, 2025
  If the picture displayed on your TV screen is blurred or divided into two parts when using your JVC Home Theater System, it could be due to the scan mode being set to “PROGRESS”. This can happen if your TV does not support progressive video input. Change the scan mode to “INT-LACE”.
A
anthonymoralesSep 4, 2025
How to troubleshoot power issues on a JVC SP-THC6S Home Theater System?
- J
  Joseph ManningSep 4, 2025
  If your JVC Home Theater System's power doesn't come on, the power cord and/or system cord might not be properly connected. Ensure that both cords are correctly connected.
G
gdaughertySep 7, 2025
What to do if it's hard to listen to broadcast because of noise on JVC SP-THC6S Home Theater System?
- T
  Tyler FrazierSep 7, 2025
  If you're experiencing difficulty listening to the broadcast due to noise on your JVC Home Theater System, the antennas may be disconnected. Reconnect the antennas correctly and securely.

JVC SP-THC6S Specifications

General

Speaker Type	5.1-channel
Configuration	5.1 Channel
Total Power Output	1000 W
Subwoofer Type	Bass Reflex
Frequency Response	30 Hz - 20 kHz
Impedance	6 Ohms
Color	Black
Tweeter Size	1"