JVC SX-XD33 - Supplied Accessories; Speaker Cords; Assembly Hardware; Speaker and Cord Information

SX-XD33
1-3
Remove the screw marked A attaching the cabinet to
the stand.
Up life the cabinet just enough to disconnect the
speaker harness from the speaker terminal.
Remove the connection of the speaker harness at
the speaker terminal of the cabinet.
Remove the cabinet from the cabinet stand
completely.
Disassembly method
Removing the cabinet
(See Fig.1~ 3)
1.
2.
3.
4.
Fig.1
Fig.2
Fig.3
Cabinet
Network
A
Speaker
terminal
Speaker
harness
Cabinet
stand
Cabinet
stand
Cabinet
Cabinet
stand
Cabinet