JVC SX-XD33 - Connecting Speaker Cords to Leg; Securing Terminal Cover

SX-XD33
1-5
1.
2.
3.
4.
5.
6.
7.
Prior to performing the following procedures, remove
the cabinet.
Remove the screw marked C attaching the speaker
terminal cover.
Remove the speaker terminal cover.
Remove the speaker harness from the speaker
terminal.
Remove the speaker harness from the cabinet base
cover.
Remove the three screws marked D attaching the
cabinet stand to the cabinet base cover.
Remove the cabinet bracket from the cabinet base
cover.
Remove the cabinet stand from the cabinet base
cover.
Removing the cabinet stand
(See Fig.7~9)
Fig.8
Fig.9
Fig.7
Cabinet
stand
D
D
C
Speaker
terminal
cover
Speaker
terminal
Speaker
harness
Speaker
base
cover
Speaker
harness
Cabinet
bracket