JVC TH-A75 - Disc Information; Playable Disc Types

TH-A75
(No.22009)1-9
2.1.8 Removing the fan motor (See Figs.17 and 18.)
• Remove the top cover.
• Remove the amplifier board.
(1) From the top side of the main body, remove the fan cover.
(See Fig.17.)
(2) Remove the tie band banding the fan motor wire and then
disconnect the fan motor wire from the connector CN174
on the power board. (See Fig.17.)
(3) Remove the screw Q and screw R attaching the fan brack-
et. (See Fig.17.)
(4) Remove the two screws S attaching the fan motor to the
fan bracket. (See Fig.18.)
Reference:
When attaching the screw Q, attach the lug wire of the
front panel assembly at the same time.
Fig.17
Fig.18
2.1.9 Removing the power board (See Fig.19.)
• Remove the top cover.
• Remove the amplifier board.
(1) From the top side of the main body, disconnect the card
wires from the connectors CN172 and CN173 on the power
board.
(2) Remove the tie band banding the fan motor wire and then
disconnect the fan motor wire from the connector CN174
on the power board.
(3) Disconnect the power cord from the connector CN101 on
the power board.
(4) Remove the screw T and three screws U attaching the
power board.
Fig.19
Power board
CN174
Tie band
Fan motor wire
Fan motor
Fan bracket
Lug wire
Front panel assembly
Fan cover
R
Q
Fan motor
Fan bracke
t
S
Power cord
CN101
CN173
CN174
U
CN172
U
T
Card wires
Tie band
Power board
Fan motor wire