15
AC~
COAXIAL OPTICAL IN USB AUX IN HDMI ARC
To the mains socket
Rear View of the Soundbar
Connecting to the Mains Supply
The soundbar is designed to operate with the supplied mains cable.
• Connecting the unit to any other power source may damage the unit.
• Ensure all audio connections of the unit are connected before connecting to the mains power socket.
• Make sure the mains plug is rmly inserted into the mains socket.
• To switch the unit o completely, remove the mains plug from the mains socket.
• Please turn the unit o completely to save energy when not in use.
• The mains cable is designed for this JVC soundbar only. DO NOT use the mains cable for other
purposes.
Soundbar
Unwind the mains cable to its full length. Connect the end of the cable to the AC~ socket
at the rear of the unit and then connect the mains plug to the mains socket. Make sure the
mains plug is fully inserted into the mains socket.
TH-D131B_IB_Final211213V2.indd 15TH-D131B_IB_Final211213V2.indd 15 14/12/2021 16:3514/12/2021 16:35
To Next Page
Loading...
Need help?
General
