18
This instruction manual explains the basic instructions for operating this unit. Unless otherwise stated, all
operations described are based on remote control use.
General Operation
Standby / ON
When you rst connect the unit to the mains socket, the unit will be in Standby mode.
• Press
on the unit or on the remote control to switch the unit on. The display will show
“HELLO”, and then enter the last used mode.
• Press
on the unit or on the remote control again to switch the unit back to Standby
mode. The display will show “STANDBY“, and then the POWER indicator will light up
red.
Automatic Power O Function
The unit automatically turns to Standby mode after about 15 minutes if the TV or the
external unit is disconnected, switched o or the volume is too close to mute.
• To switch the unit o completely, remove the mains plug from the mains socket.
• Please turn the unit o completely to save energy when not in use.
Selecting Modes
Press button on the unit or remote control repeatedly to select between BT (Bluetooth®),
HDMI (HDMI ARC), OPT (Optical), and COA (Coaxial) mode.
Adjusting the Speaker Level Settings and Eects
Adjusting the Volume
• Press VOL+/VOL– to adjust the volume.
• If you wish to turn the sound o, press MUTE on the remote control. Press MUTE again,
or press VOL+/VOL– on the unit or on the remote control to resume normal listening.
Select Equaliser (EQ) Eect
Press the EQ button on the unit or remote control to select the preset the equaliser eects:
NEWS/MOVIE/MUSIC.
TH-D329B_IB_Final190625V2.indd 18 26/06/2019 14:25
To Next Page
Loading...
Need help?
General
