19
Adjusting the Bass/Treble Level in CUSTOM EQ mode
1. Press CUSTOM button on the remote control to set the unit into CUSTOM EQ mode.
The display will show CUSTOM.
2. Press BASS/TREBLE button on the remote control. BASS/TREBLE will ash in the
display.
3. Press VOL+/VOL– button repeatedly to adjust the bass/treble level (MIN / –2 / –1 / 0 /
1 / 2 / MAX).
4. After about 5 seconds, the unit will exit from BASS/TREBLE setting. The display will
show the current selected mode.
5. You may now press VOL+/VOL– button to adjust volume.
OPTICAL / COAXIAL / HDMI ARC Operation
There are OPTICAL/COAXIAL/HDMI ARC sockets located at the rear of the unit.
1. Before connecting to the mains socket, ensure all the connections are completed.
2. While in the On mode, press
button on the unit or remote control repeatedly to
select between OPT, COA and HDMI mode.
3. Operate your audio device directly for playback features.
• While using COA / OPT / HDMI mode, ensure the audio setting of the input source (e.g. TV, games
console, DVD player, etc.) is set to PCM (Refer to the user manual of the input source device for its
audio setting details) with optical / coaxial / HDMI output.
• When entering non-PCM audio formats, there is no sound output from the unit, and the display will
show INVALID.
TH-D329B_IB_Final190625V2.indd 19 26/06/2019 14:25
To Next Page
Loading...
Need help?
General
